How PDC Mining Drill Bits Are Made

Jan 03, 2025

Leave a message

Material preparation‌: PDC drill bits are mainly made of polycrystalline diamond composite sheets (PDC) and tungsten steel. PDC is made of artificial diamond particles sintered under high temperature and high pressure, and has high hardness and wear resistance‌.

‌Mold design‌: According to the shape and size requirements of the PDC drill bit, a reasonable mold structure is designed. The design of the mold needs to ensure the geometry and dimensional accuracy of the drill bit‌.

‌Compression molding‌: Put the granulated mixture into the mold and apply pressure to shape it. After molding, the blank is taken out of the mold and preliminarily processed to obtain the blank to be sintered‌.

‌Sintering‌: Put the blank into the sintering furnace and heat and keep it warm at a certain temperature and atmosphere. During the sintering process, the blank is densified by material migration and flow. After sintering, the workpiece is slowly cooled to room temperature to obtain good organization and performance‌.
‌Grinding and polishing‌: The sintered PDC drill bit needs to be ground and polished to improve its surface quality and precision‌.
‌Application areas of PDC drill bits‌: PDC drill bits are widely used in the geological drilling industry, especially in oil drilling. Its durability and high efficiency enable it to remain sharp and durable under extreme conditions, achieving a fast penetration rate‌.
‌Design elements of PDC drill bits‌: The design of PDC drill bits includes parts such as composite pieces, cutting structures, blades and drill body. The composite pieces are usually cylindrical and mounted on a tungsten carbide substrate. The cutting structure is complexly designed to ensure that the drill bit cuts according to the designed geometry. The chip grooves between the blades are used to flush away the cuttings‌