Structural composition
The three-cone drill bit consists of three rotating cones, each of which is equipped with multiple cutting teeth. The cone is connected to the drill body through a bearing and is equipped with more than 20 parts such as locking elements, oil storage seals and nozzle devices.
Tooth type
According to the tooth fixing method, it is divided into two types: insert teeth (carbide teeth) and milling teeth (steel teeth). The insert tooth drill bit uses high-strength and high-toughness carbide teeth with strong wear resistance and cutting ability; the steel tooth drill bit has a new wear-resistant material welded on the tooth surface, with high mechanical drilling speed and long service life.
Bearings and seals
Rolling bearings or sliding bearings are used, and the sealing methods include rubber seals and metal seals. The metal seal has a precise structure to ensure the sealing and high temperature resistance of the bearing lubrication system, and the rubber seal improves the sealing reliability through a high-elastic rubber ring.
Locking method
Steel balls are often used to lock the cones or retaining rings to ensure that the cones work stably under high drilling pressure and high speed.
Lubrication system
Equipped with all-rubber oil storage bag and high-temperature anti-wear grease to ensure good lubrication of the bearing system and extend the life of the drill bit.
Working principle:
The drilling pressure and the rotation of the drill string make the teeth on the cone impact, crush and shear the formation rock. The bottom rock is completely broken through crushing and sliding shearing to promote the extension of the wellbore.
Application range
Suitable for soft, medium, hard and extremely hard formations, widely used in various drilling fields such as petroleum, geological exploration, water wells, geothermal wells, etc.
Use precautions
During operation, it is necessary to prevent the cone gear from being damaged, keep the mud clean, control the drilling speed, prevent the drill from slipping and stopping, and adjust the drilling parameters in time to cope with complex formations.

