Hard alloy soft soil cutter
During excavation in soft soil and composite strata, hard alloy scrapers are required for face scraping. For soft soil cutters, the service life primarily depends on the superior wear resistance of the hard alloy, which consequently limits their application range based on the alloy's performance. The curtain wall industry consensus indicates these scrapers should only be used in rock strata with uniaxial compressive strength below 20MPa, as higher strengths may cause hard alloy fracturing.
According to the types, cemented carbide soft soil cutters for shield can be divided into center cutters, front cutters/front scrapers, edge
scrapers, leading cutters, over cutters, and various protection cutters (such as peripheral protection cutters, cutter box protection
cutters, and nozzle protection cutters).
Scraper steel substrate
The scraper's steel substrate is fully forged from 42CrMo steel produced by leading domestic steel manufacturers - China Metallurgical Special Steel Corporation (CMSC) and Xining Special Steel. Through optimized heat treatment processes, the rough casting undergoes precision machining and tempering to achieve a hardness range of HRC40-44. This guarantees optimal balance between wear resistance and impact toughness, while maintaining essential rigidity and superior weldability for the cutter body.


Carbide Inserts
The carbide inserts utilize premium-grade alloy from Zhuzhou Cemented Carbide Group Co., Ltd., a globally recognized brand.
Key features include:
01. Production employs imported high-precision automatic presses, minimizing human interference and eliminating macro-level contamination/void defects, guaranteeing consistently excellent product quality.
02. Sintering utilizes authentic German-made pressure sintering furnaces, achieving zero alloy porosity. The impact toughness exceeds conventional vacuum-sintered products by over 20%, ensuring superior cemented carbide performance.

|
Number |
(g/cm³) |
( HRA) |
(N/mm²) |
|
TK11C |
14.4-14.6 |
≥87.5 |
2680 |
|
TK13C |
14.3-14.5 |
≥87.0 |
2750 |
|
TK15C |
14.1-14.3 |
≥86.5 |
2850 |
Usage Recommendations:
For optimal performance, we recommend using our YG13C grade cemented carbide inserts for cutting edges. This grade delivers exceptional wear resistance combined with superior impact toughness, significantly reducing the risk of carbide fracture under impact loads. Its excellent weldability further minimizes welding stress-induced cracking risks.
For backing components, YG11C grade cemented carbide bars are advised. As the back section sustains lower impact forces, this higher-wear-resistance grade provides ideal performance. This strategic material combination achieves the perfect balance between normal wear and impact protection, ensuring reliable long-distance drilling operations.
Atmospheric tearing knife
We have supplied highly wear-resistant and impact-resistant atmospheric pressure tearing knives to multiple equipment manufacturers and project departments. These solutions effectively address tool wear resistance and replacement challenges in large-diameter shield tunnel excavation projects, while supporting uninterrupted project progress.

Front scraper
The front scraper is a soft soil cutter installed on both sides of the cutter head's opening slot. As the shield machine advances, the rotating cutter generates axial shear force and radial cutting force on the excavation face soil, enabling continuous cutting action. This tool is specifically designed for loose formations including sand, gravel, pebbles, and clay, with its installation height set lower than hobs or leading cutters.

Edge scraper
The edge scraper is mounted at the periphery of the cutter head, specifically designed to remove rock/soil debris from the tunnel face edges and efficiently transfer the muck into the collection chamber.

Center cutter
To enhance soil cutting and mixing efficiency at the central zone, the center cutter is positioned at the cutter head's core. It performs dual functions of scraping central rock/soil and processing face materials. Current industry standards feature two primary configurations: integrated fishtail-type center cutters and modular split-type center cutters.

Modular Split Center CutterLeading cutter
The leading cutter is mounted at a higher position than front scrapers and positioned ahead of them, providing effective protection for the scrapers. It pre-cuts the soil into manageable blocks before the scrapers' operation, creating optimal cutting conditions. Characteristically, the leading cutter features a narrower cutting width than scrapers while delivering superior cutting efficiency.

Over cutter
During tunnel construction, the over cutter can be radially extended/retracted from the cutter head periphery to achieve precise over-excavation control. By creating additional excavation space through controlled soil removal, it enables the shield machine to execute curved advancement, smooth steering, and trajectory correction maneuvers.

Protection cutter
Available in various configurations and dimensions - including panel protection cutters, peripheral protection cutters, wear plates, nozzle guards, cutter box protectors, and cutter holder shields - these components are engineered to prevent premature wear of the cutter head during tunneling operations.





