

Hob is mainly used for tunneling in full-section strata or composite strata.It is the main cutter for shield rock breaking.When tunneling, as the first cutter,it takes the lead in rolling and crushing the rock surface,and then scrapes off the rest rock and soil on the face with the help of other cutters such as scrapers,thus completing the tunneling of the working face.
At present,our company can produce a full range of cutters for shield machines of all brands,such as China Railway Equipment,China Railway Construction Heavy Industry,Herrenknecht, Wirth,Robbins and Komatsu,with sizes ranging from 10 inches to 20 inches.Our company can optimize the hob design according to the needs of shield construction at home and abroad,so as to better meet the use requirements of customers.
The bearings and seals of our hobs are imported from Europe and America.By strictly controlling the whole process of cutter mechanism design,material smelting,forging,machining,heat treatment and assembly,we can ensure the excellent quality of our cutters and create preconditions for long-distance tunneling.
Center Hob
The center hob is positioned at the central axis of the cutter head, providing primary rock-breaking force during tunneling.
Edge Hob
The edge hob is installed in the transitional zone of the cutter head periphery, set at a specific inclination angle to optimize rock fragmentation.
Front Hob
The front hob is mounted perpendicularly (90°) to the cutter head's face, ensuring efficient cutting force distribution.


Hob Size And Load List
|
Hob size |
10 inches |
12 inches |
14 inches |
15 inches |
17 inches |
18 inches |
19 inches |
20 inches |
20 inches |
|
Outer |
254mm |
305mm |
355mm |
381mm |
432mm |
457mm |
483mm |
508mm |
508mm |
|
Rated load |
100KN |
125KN |
125KN |
176KN |
255KN |
255KN |
355KN |
355KN |
420KN |
Hob Structure Exploded View

Main Accessories of Hob Cutters
The key components of a hob cutter assembly include: Cutter ring ,Cutter holder,Shaft assembly ,Sealing system ,Precision bearings ,Spring retention mechanism, Protective cover ,High-strength fasteners .
These components are critical for ensuring optimal cutter performance and service life. The cutter ring and bearings in particular are engineered to withstand extreme dynamic loads and abrasive wear conditions.
All rolling cutter accessories are made of imported components,which have significant advantages in material quality and accuracy,thus better ensuring the effectiveness and long-term service life of rolling cutters in complex operations.These high- quality accessories perform well in terms of wear resistance,impact resistance,and long-term operation,significantly improving the overall operational stability and durability of the rolling cutter.




Quality Assurance
All hob cutter components utilize imported premium materials that provide:
✔ Superior metallurgical properties
✔ Dimensional accuracy within 0.01mm tolerance
✔ Certified hardness ratings (HRC 58-62 for cutter rings)
This results in exceptional:
Wear resistance (3x industry standard)
Impact toughness (tested to 200J/cm²)
Continuous operation capability (10,000+ hours MTBF)
The combination of these high-performance components significantly enhances:
➤ Cutting efficiency in hard rock formations
➤ Operational stability under variable loads
➤ Overall service life (30% longer than conventional designs)




